{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 -1}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 9.0 Build 235 06/17/2009 Service Pack 2 SJ Web Edition " "Info: Version 9.0 Build 235 06/17/2009 Service Pack 2 SJ Web Edition" {  } {  } 0 0 "%1!s!" 0 0 "" 0 -1} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 08 15:12:39 2022 " "Info: Processing started: Tue Mar 08 15:12:39 2022" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 -1}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 -1}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off 38_decoder -c 38_decoder " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off 38_decoder -c 38_decoder" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 -1}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Info: Parallel compilation is enabled and will use 4 of the 4 processors detected" {  } {  } 0 0 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "" 0 -1}
{ "Info" "IMPP_MPP_USER_DEVICE" "38_decoder EP2C8Q208C8 " "Info: Selected device EP2C8Q208C8 for design \"38_decoder\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0 -1}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Info: Low junction temperature is 0 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 -1}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "Info: High junction temperature is 85 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 -1}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0 -1}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208C8 " "Info: Device EP2C5Q208C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 -1} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208I8 " "Info: Device EP2C5Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 -1} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8Q208I8 " "Info: Device EP2C8Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 -1}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0 -1}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 1 " "Info: Pin ~ASDO~ is reserved at location 1" {  } { { "d:/altera/90sp2/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90sp2/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 -1} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 2 " "Info: Pin ~nCSO~ is reserved at location 2" {  } { { "d:/altera/90sp2/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90sp2/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 -1} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS54p/nCEO~ 108 " "Info: Pin ~LVDS54p/nCEO~ is reserved at location 108" {  } { { "d:/altera/90sp2/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/90sp2/quartus/bin/pin_planner.ppl" { ~LVDS54p/nCEO~ } } } { "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/90sp2/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS54p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 -1}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0 -1}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0 -1}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0 -1}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "" 0 -1}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Extra Info: Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" {  } {  } 1 0 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "" 0 -1}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "Extra Info: No registers were packed into other blocks" {  } {  } 1 0 "No registers were packed into other blocks" 0 0 "" 0 -1}  } {  } 0 0 "Finished register packing" 0 0 "" 0 -1}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Info: Fitter preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X23_Y10 X34_Y19 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X23_Y10 to location X34_Y19" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0 -1}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0 -1}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0 -1} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0 -1}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0 -1}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0 -1}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "8 " "Warning: Found 8 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y7 0 " "Info: Pin \"Y7\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y0 0 " "Info: Pin \"Y0\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y1 0 " "Info: Pin \"Y1\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y2 0 " "Info: Pin \"Y2\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y3 0 " "Info: Pin \"Y3\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y4 0 " "Info: Pin \"Y4\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y5 0 " "Info: Pin \"Y5\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Y6 0 " "Info: Pin \"Y6\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 -1}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0 -1}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0 -1}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/projects/quartus/38_decoder/38_decoder.fit.smsg " "Info: Generated suppressed messages file D:/projects/quartus/38_decoder/38_decoder.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0 -1}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 1  Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "305 " "Info: Peak virtual memory: 305 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 -1} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 08 15:12:40 2022 " "Info: Processing ended: Tue Mar 08 15:12:40 2022" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 -1} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Info: Elapsed time: 00:00:01" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 -1} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Info: Total CPU time (on all processors): 00:00:01" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 -1}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 -1}